hello all
Start the light tracking static image rendering 
When rendering can be used without using the CPU only use the GPU, because I found that sometimes use the CPU to cause the computer to crash.
2.I do not want the light trace to open and cause the computer Caton model to not rotate.
keyshot rendering will not cause the computer card, NX start ray tracking window after feeling nx fluency will be worse, the software becomes very card, can not smooth operation nx.
If we have for example 4 screws (same component different instances) in an assembly and we replace one of them by other screw, NX keeps the same ballon number for the new screw so in the part list it may be a bit confusing. Is that normal? A Bug? A NX/TC configuration? Thanks in advance
Hello all,
I had come across a situation where I had created a named expression with type length(mm unit), which was supposed to be constant type.
Created dimenion then used in several sketches and several times.
Finally I realised the mistake and wanted to change. When I get in to expression list it didnot allow me to change the expression type untill I changed all references to other expression.
is this how it intent to work ? or am I missing something here?
help me on this !!!!!!!!!!!!
thanks in advance..
NX10.0
Is there any way to hide the dashed line sheet border and/or "Sheet "<sheet name>" Work" text when exporting a drawing as an image file? It hides both of these when exporting to a PDF but we need to export a .jpg or .tif for a particular application. I've been digging through preferences but can't find anything...
Hello everybody,
I need to add standard parts to subassembly in PDW. Which part I should edit? Do you know which atribute should I add where??
I hope u have any idea how to help me.
best regards
lukipap
Hello Folks,
i had to create a part with several openings witch i control with "Suppresed by Expressions" No i got the situation that i need some logic in it. Example.
If Opening 7 is active two other openings must be suppressed. With Expressions it works fine. BUT i would to this in the part Family. But i can select the expressions with if and then.
I Also tried to pack them in an other expression but the inteligence of NX recognized it also. I tried to do in Excel but won´t work also.
IS it possible to do or not? Tried with NX10 , NX11, NX11 Daimler
i am unable to see and assign all available material to part when i start the project in mold wizard application?
only nylon material is listed?
what is the problem?
Hello NX team,
can anybody help me, how to change fonts style, size, Bold/ italic style in NX
& only software font would change, not for system fonts
is there any provision there to change it,
appreciate for help
Hi, I need to have a title block with two parts: main title block positioned bottom right plus a note up right (see image below). I have done a single title block composing the tabular notes according to my need, and it is ok.
But if I edit the size of the sheet (eg from A2 to A3) I have to manually edit the upper part of the Title Block.
I know it is an obvious behaviour, being a block it behaves like a block, but has anybody a hint to avoid this? I tried making two separate title blocks, but it doesn't work.
Thankyou
Hello,
I'm searching for an overview of the function of the internal Spreadsheet which I can start with Tools -> Spreadsheet.
For expressions and attributes I already used it but what about the other functions.
I read something about creating family members but it seems as if it is not editable afterwards.
How can I create symbols with the spreadsheet and what about the assembly rage?
I hope some people give me advises oder guidelines for explaining the functions.
Thanks in advance.
Christian
Hi,
I was told there is a video about bilingual title block, but I didn't find it. Anybody knows something about?
Thank you
Hello,
I have a problem with creating new revision in the NX. While I create new revision of design it saves only in 1 part and I can't choose more parts despite the fact it occurs in more parts. I need to have all parts with old revision updated to new one. Is it possible?
Attached is a simplified model to illustrate the issue I have.
For venting/cooling fluid flow, I need to connect two compound angled blind holes by a side drilled hole.
With basic sketch construction, how could I find the intersection point of the drilling axis and the side face?
In my Sketch (7) on the side face, I’ve created a Point on Curve Constraint but that doesn’t work as intended. I think this is a NX sketch limitation and should be revamped.
I work a lot with imported models.
Most of them are originally made with CATIA V5 and then stored in TC with the JT put at disposal.
Such JT always contains exact geometry.
Most of the times the Thickness Dimension command does not work properly.
Am I doing something wrong?
This kind of errors occurs since I can remember that such function was implemented in NX.
Many thanks in advance for your kind support.
Hello@guys,
I can't see the attachment in NX design form which anybody posted, even also my attachment I can see
is there any update or any issue in site development
I have a pneumatic cylinder downloaded from a 3D library. I have stored al his components in the same prt (body, rod...) but in different bodies. If it is possible we prefer to store every purchased item in just one item/prt. I have created an assembly that contains the cylinder plus screws fittings, magnetic detectors... and in this assembly I would like to create arrangements with a body I have created that I am going to use to create assembly constrains form this assembly to other components of a father assembly. I just need to be able to have one body in different possitions for each assembly arrangement.
I was playing around inside NX 11 sketcher and noticed that when I make a sketch curve reference and exit the sketcher the curve disappears. It does appear when I edit the sketch.
Is this the new normal? I was hoping to use the curve as a vector.
Dear community,
We are preparing assembly drawing for large assembly.we create all the views and make it to "snap shot".
we found error that while storing drawing file in TC without no part or assy in assembly naviigator.
One of my colleague work with components in assembly file.
Now the issue is the drawing is not saving as new part file.It shows error.
kindly share me alternative processes for large assembly drawings. NX 8.5
