Why would a non-timestamp point return?
I noticed that I have 4 non-time stamp points in my model file, and I have no idea why they are there. I figured someone else added them to the previous rev., and I was going to delete them. They are...
View ArticleClik here to view.
How to make an assembly square to the world
NX 10.I have created an assembly in which the parts came in at various angles compared to the world. I would like to square up the entire assembly so that when I create drawing views I will be able to...
View ArticleClik here to view.
NX 7.5 Import STEP / IGES - Translation did not complete
Hi, I experience strange issues when import IGES / STEP this morning , the import menu did shows up with a all the translation status running properly until the end of the process , the menu -...
View Articlemultiply the quantity in part list
hello mister. In a part list, I must multiply by a factor (2,3,4 ...) the quantity. the category Quantity " $~Q " is assembly parametre.is it possible to customize it or create a new parameter...
View ArticleFile-new dialog size in NX12 / managed
Is there an option, somewhere, somehow to control/ change the size of the file-new dialog ? - Registry ?In NX10.x under Teamcenter this dialog was large and displayed all required fields.In NX12.0.1...
View ArticleOptimize an expression?
I'm designing a part that includes a coolant channel. I want to optimize the size of the channel to keep the pressure drop below a certain value. Unfortunately the relations for modeling this are a...
View ArticlePart family member doesn't update via part family table?
Hi,This is my first post on this forum. I use NX 8.5 and TeamCenter 8.3. I'm having difficulty up-revising a part family member in a part family. I'm able to update and save the appropriate fields in...
View ArticleTrying to draft surfaces - Face Rule drop down grayed out
I am working in NX11, and I've recently started having a problem where the drop down menu that allows you to select things like "single face, tangent faces, body faces, etc" is grayed out (i.e. I...
View ArticleClik here to view.
GLUE vs. CONTACT-TIED
1. GLUE 2. Contact-tied I want to know the diffrence with tied and glue. I tried to do the same drop simulation (unlinear),and the displacement result(movement) was almost same.But the stress result...
View ArticleSevere Error 69 in Line 210: NX Fails to Open Through TC
I'm running into an issue where I can't open NX (12.0.1.7) within the Teamcenter (11.5.0.2(20180727.00)) environment. The NX window pops up, stalls for a minute or two, and then crashes. I get the...
View ArticleArrangement specific in Nx 11.0
What is arrangement specific in Nx 11.0, What is the difference of the `Fully constrained’ and `Fully constrained, arrangement specific’. In the attached what exatly the position symbols convey.
View ArticleJournal VB.net - Datum CSYS
Hello all,I'm strugling trying to create a Journal in VB.net that do the following: Loop over all the Datum CSYS created in my featuresSelect some of that (by name, or all the CSYS in a certain layier,...
View ArticleCan't find part files - assembly (upgraded NX version)
Hi, So in NX 11 I made an assembly, and now after upgrading to NX 12 all the part files in the assembly fail to load. When I replace the components so it can actually find them and load them into the...
View ArticleExcel part families
Hi,we have the Excel part families for exagon bolt with 377 rows. When I open the Excel table I need to wait 20 minuts. It's normal. There is a solution to speed up ?Using a SQL Lite or an access DB ?
View ArticleSolid Weld Point Display management
Hello, I've been using the weld assistant and Weld Point Wizard for a few projects now, but am having trouble finding a good straightforward way of managing the display of the solid weld points. Does...
View ArticleMeasure Taper Angle of a Hole
We use a lot of tapered holes. Is there any easy way of querying the taper angle of tapered hole?
View ArticleClik here to view.
Through curves mesh error
Hi,I have problem with through curves mesh.I have 3 rectangles in 3 levels. I connect their corners with 3 point arcs. I am sure there is no gap in the corners.when I want to use through curves mesh to...
View ArticleClik here to view.
NX11.0.2.7 imported DWG/DXF file will show "conversion is not complete"
As the picture show,when NX11.0.0.33 or NX11.0.2.7 imported DWG/DXF file will show "conversion is not complete", (import other files have the same problem),And then leave a log on the desktop (log...
View ArticleWith NX12 reimported step 242 sets the PMI wrong
Hi, I have got a STEP 242 licence and exported a STEP 242 modell with PMI.As I opened a new model in NX12 to import this STEP 242 with its PMI to try if this works, the PMI feature control frame shows...
View ArticleHelp Editting Dimensions
I've been searching on the intenet but can't seem to find a solution or explanation for my problem. When I am sketching one I create a dimenion, it won't let me go back and edit the dimension. I have...
View Article