Clik here to view.
Controlling expressions when components are Load status: Not loaded
Hello everyone,NX11.0.2 & Teamcenter 111. Is there any way to control expressions by when certain components are Load Status: Not loaded in the assembly?StoryMy assembly have some Linked bodies and...
View ArticleLinking Text to its Part Name on model
1.If part name is "Ejector Pin_1"I want to show only "E1" on model..In short "first letter and last digit (1,2,3......25)"2. If change part name "Ejector Pin_25" then it will automatically change to...
View ArticleUnable to select or dimension a component
I have no filters set, and all snap points turned on. I open a file from a few months ago, and am unable to dimension or even add an arrow/leader from a simple note. This has happened before from time...
View ArticleCan I re-purpose the refile_part application to import existing CAD data with...
I have a massive NX 10 assembly which has been created without custom start parts. It is now required to open every .prt file in the new custom template and save them, thereby adding the...
View ArticleClik here to view.
Face Blend > Rolling Ball > Spine Curve
In Face Blend, when Orientation is set to Rolling Ball, Select Spine Curve is still available. It seems to me that only Swept Disc needs a spine curve. What's wrong with my understanding? Thanks!...
View ArticleClik here to view.
Add Material in Part Families
Hi there, Anybody knows how to add material in Part Families? I attached to model a material by using Asign Material command, but when I choiced Material collumn in the Part Families command, the alert...
View ArticleEjector Pin Table in Drafting on one sheet
How to create Ejector Pin table like....see attachment.If i change Ejector Pin diameter, collar diameter,length,Qty,bit will automatically change in table...See attachment
View ArticleNX 12.0.2 Measurements Consolidation Videos
For all of you interested in the new Measure command in NX 12.0.1 MP1 and NX 12.0.2, I've added fourteen video clips to the Knowledge Base article here:...
View ArticleClik here to view.
Face Blend > Boundary Method > Constant
Face Blend > Rolling Ball > Automatic > Curvature Symmetric Is there any difference between "Constant" and "Law Controlled > Constant"? Thanks!
View ArticleClik here to view.
Face Blend > Trim > To Short > Sew All Faces
With Face Blend > Trim > To Short, it seems that Sew All Faces must be checked. If Sew All Faces is unchecked, Trim Blend would be forced to "To All". What's wrong? Thanks! To Short is ok to work...
View ArticleClik here to view.
Aesthetic Face Blend > Trim > To Short
With Aesthetic Face Blend > Trim Blend > To Short, Trim Body to Blend is unavailable. I have no choice but to switch to "To All", enable "Trim Body to Blend" and then use "Length Limit" to trim...
View ArticleClik here to view.
Aesthetic Face Blend fails to traverse a G2 edge
(1) I tried to blend a face with two other faces of G2 contiuity.(2) But Aesthetic Face Blend failed to traverse the G2 edge.(3) If I created two separate Aesthetic Face Blends, they are not...
View ArticleClik here to view.
Using expressions to define tolerances in 2D drafting
Greetings, I'm wondering, is it possible to use NX expression to make a associative tolerance, which would depend on some other dimension like shaft diameter. In the picture below I would like to...
View ArticleDifference between instance attribute and component Attribute
Hello Experts,I am unable to figureout when to use instance attribute and when to use component attribute in an assembly especially with reference to callout (TC environment)Please guide. Thanks, Prasad
View Articleconnect signal of MCD with conventional expresion
Helow everyone I'm working with MCD aplicatyon I have many questionsyou know any way to connect signal of MCD with conventional expresion of NX. Thanks for the attention Best regardsAngel Querejazu
View ArticleExamine Geometry → no icon assigned
Examine Geometry should be an important analytical command. In the documentation there is a tip: It is recommended to use this command on a regular basis. Regular use allows model integrity to be...
View ArticleClik here to view.
Aesthetic Face Blend - placement
In the example below, how could the blend be placed on the top side? I tried (1) selecting the top edge, (2) selecting faces near the top side, and (3) changing the selecting sequence, but failed to...
View ArticleHidden lines for one part/body in drafting
Hi, my first post here.I started using nx a recently. Previously I was using CATIA.I wanted to show hidden lines (for holes, machining etc) for only one or two parts (in red area in the picture...
View ArticleClik here to view.
Command 'Create Section' missing in NX11 for individual 3D-Section views
Hello, i miss a command from NX10. Is there a way to make a 3D 3/4-section-view with an individual scetch in NX11, where i can keep parts out of section? I need this command for lager assemblies and I...
View ArticleClik here to view.
Attach NX camera to component
Hi Community! I want to model the field of view of a camera (in CAD) using the NX camera functionality. I have thus imported a CAD-model of the camera as a component to my model. Then, I defined a NX...
View Article